M1 Power > Power Products Overview

Power Products Overview


Battery Chargers

battery chargers power products overview

AT10

AT10 HindlePower Series is the standard in stationary battery chargers. Easy to install, operate and maintain, it also includes a 5 year standard warranty. AT10 single phase battery charger features: 12, 24, 48 and 130Vdc output voltage and 6 – 100 amps of dc output current.

AT30

AT30 three phase battery charger from HindlePower  is one of the easiest to operate float battery chargers. With an unrivaled 5 year product warranty, the AT30 features: 12, 24, 48 and 130Vdc output voltage and 25 – 1000 amps dc output current.

ATevo

ATevo single phase battery charger is HindlePower’s next generation SCR-based utility battery charger. Retaining the quality and integrity of the AT Series, ATevo was designed to satisfy your NERC and utility industry requirement. It features: 24, 48, 130 & 260Vdc output voltage and 6 – 25 amps dc output current.

Truecharge2

Xantrex TRUECharge Battery Charger is a high performance worldwide charger. Designed for commercial applications, the TRUECharge features an input voltage of 90 Vac to 265 VAC, 47 to 63 Hz. Available in 10, 20, 30, 40 & 60A versions.

Intellicharge

The ICT IntelliCharge Series is a high efficiency,  power factor corrected DC power supply and 3-stage battery charger.  It allows the battery charge to be regulated independently from the DC outputs. Available in 12, 24 and 48 volt DC models with 180 or 360 watts of output power .

Majortel Telecom

The Majortel Telecom DC Power System,  1U & 2U  sleek, compact design that is ideal for applications requiring DC Power.Installations could include one, two or up to four switch-mode rectifiers 15 or 25  amps each for a total system capacity configuration of up to 2800W for the 1U and 2900W to 5800W for the 2U.

Majortel Utility

The Majortel Utility DC Power System,  is a 1U sleek and compact design that is ideal for applications requiring DC Power.  Installations could include one or two compact high density and reliable switch-mode rectifiers, 10 Amps each for a total system capacity configuration of up to 2800W.


Inverters

inverters power products overview

Majorsine Telecom Inverter

Majorsine Telecom Inverter by Majorpower features the integrated utility bypass pure sine wave from a dc source. Designed and built for full reliability at any location, these inverters are available in 24 & -48VDC input models, with an AC output load capacity of 1 KVA/800W or 2KVA / 1600W.

Majorsine Utility Inverter

Majorsine rackmount Utility power inverter by Majorpower provide economical AC power for all your needs.  Designed for long mean time between failure, these inverters feature: 125VDC input, 1 KVA/800W or 2 KVA/1600W 0utput.

Freedom X

The Xantrex Freedom X Inverter true sine wave 120 Vac offers premium performance in a lightweight compact package. Available in 1000W, 2000W & 3000W.

Prowatt SW

Prowatt SW is a compact & affordable inverter, with 540, 900 and 1800 watts continuous – 120 Vac / 60Hz. Ideal for transportation applications.

XPower

Xantrex XPower inverter series provide mobile power for trucks, RVs, and boats. 1000, 1500, 3000 and 5000 watt models available.

Freedom XC

Robust & compact true sine wave 120 Vac inverter/charger. With built-in transfer switch,  it is  available in 1000W/50A & 2000W/80A.

Freedom SW

Xantrex Freedom SW is  high surge, full featured inverter/charger, Available in 3000 W with 80 A charger and 2000 W with 55 A charger.

Freedom HF

The Freedom HF inverter/charger is available in: 1000 watts with a 20-amp charger, 1000 watts with a 55-amp charger and 1800 watts with a 40-amp charger.

24VDC Input Inverter Index

Inverters & Inverter/Chargers with 24VDC Input. Prosine, PST & N Series.

Heavy Duty Steel Mill Inverter INV-250

INV-250 is a pure sine wave, NEMA 4 crane inverter designed to operate in harsh environmental conditions found near cranes and steel mill. Available in 1KVA, 3KVA & 5KVA models.

Meduim Duty Major 500/1000/2000

Medium duty 500, 1000 & 2000VA DC/AC steel mill inverters. Rugged, sine wave 250 VDC to 115Vac/60Hz.


Frequency Converters

frequency converters power products overview

Single Phase Frequency Converter

The MDS Power FC Series FC500, FC100 & FC2000 are highly compact AC/AC frequency converters. They feature full electronic protection, high efficiency and low output noise.  Available in 500, 1000 & 2000VA power. Universal Input with 400 Hz output power,  60 Hz output power & 50 Hz output power.

3-Phase 400hz Frequency Converter

The 3-phase 400hz Frequency Converter is 1500VA, pure sine wave, ultra quiet and highly reliable.


DC/DC Converters

dc dc converters power products overview

Isolated 2

ICT Isolated  Converter Series are available from 120 watts to 420 watts, in step up and step down models.  Input voltages range from 10 to 160VDC, with outputs in 12, 24 and 48VDC to cover virtually every application.

Site Converter Series

The ICT Site Converter Series is a high current, high efficiency rack mount DC to DC converter. Input voltage ranges from 20-60 volt DC,  with both 24 or 48 volt DC inputs to provide clean, efficient 12 or 24 volt DC power output.

Industrial Power Series

Non isolated DC/DC converters, Class 1 Div 2 hazardous locations rated. Highly efficient and long-lasting on negative ground systems. Models are available ranging from 10 amps to 40 amps.

Majortel Utility

The Majortel DC DC Converter system from Majorpower  is ideal for applications requiring 24V or 48V dc power from a 130V dc power source. Wide DC input range with user selectable output voltage.

VTC Converters

VTC DC/DC Voltage Converter Series by Analytic System, are common negative or fully isolated models. Designed to perform in the harshest environments, they are available in voltages from 12 to 400 volts IN to 12 to 72  volts OUT.

VCH10 Converters

The VCH10 DC/DC Voltage Converter Series supply up to 10 amps of output current at 12, 24, 36 or 48 volts from any higher voltage between 20 and 80 volts DC for use in automotive, heavy equipment, marine, industrial, rail or alternative energy environments.


Power Distribution

power distribution power products ovreview

Distribution Series

ICT Distribution Series 2 & Distribution Series 3, single and dual DC power Distribution Panels designed to be used in 12, 24 or 48VDC applications.

Circuit Breaker Panels

Trimm Optimum Value Circuit Breaker Panel 9072101001 & 9075101001 offer a cost effective design for those needing circuit breaker protection from 5 Amp to 30 Amps per position.

Optimum Value GMT Fuse Panels

Trimm Optimum Value GMT Fuse Panel offers fusing to either 15 or 20 Amps per position (depending on version ordered) with up to 40 fused position per panel. 80 or 100 Amps Bus Capacity

Full Cabinet GMT Fuse Panels

Full Cabinet GMT Fuse Panels (707 Series) offer fusing to either 15 or 20 Amps per position,  for a max 15 or 20 Amps per position and 65, 100 or 125 Amps bus capacity.

DST Distribution Panel

The DST Distribution Panel by Newmar is a high density, 2RU rackmount panels designed to accommodate virtually any 48, 24 or 12 VDC power distribution requirement.


Power Supply/Rectifiers

power supplies rectifiers

Digital Series

ICT Digital Series DC power supplies units provide 675 or 1350 watts of power and 12, 24 or 48VDC output. Ideal power solution for telecom industry.

PRO Series

The Pro series line is a high performance, cost effective, high efficiency 1RU DC power supply designed mission-critical applications. The units provide provide 690 or 1200 watts of power with 12, 24 or +/- 48VDC output

Comm Series

Designed for mobile radio communications equipment, the ICT Comm Series are available in 120 and 220 VAC inputs with 12, 24, and 48 VDC outputs.

Modular Power Series

The ICT Modular Power Series system provides flexible, managed DC power for communications applications.  They provide  700 watt hot swappable 12, 24 or 48 volt power modules. Up to 2800 watts of power in a single shelf.

N+1 Redundant Series

Fault Tolerant DC Power Supplies in 12 and 24VDC Output. They are manually switchable between 120 and 220 VAC input voltages and are available in 13.8 and 27.6 VDC output voltages.

Majortel Telecom DC Power System

The Majortel Telecom DC Power System,  1U & 2U  sleek, compact design that is ideal for applications requiring DC Power.Installations could include one, two or up to four switch-mode rectifiers 15 or 25  amps each for a total system capacity configuration of up to 2800W for the 1U and 2900W to 5800W for the 2U.

Majortel Utility DC Power System

The Majortel Utility DC Power System,  is a 1U sleek and compact design that is ideal for applications requiring DC Power.  Installations could include one or two compact high density and reliable switch-mode rectifiers, 10 Amps each for a total system capacity configuration of up to 2800W.

DIN Rail DC System

DIN Rail DC System from Newmar combines all system power functions: power supply, battery charger, UPS circuitry and status monitoring in one compact DIN rail mount unit.Available in 12, 24 and 48VDC.